D-Link DAS-3636 Cli Reference Manual page 273

show cfm linktrace
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the CFM linktrace:
DAS-3626:admin#show cfm linktrace mepname 3 trans_id 1
Command: show cfm linktrace mepname 3 trans_id 1
Transaction ID: 1
From MEP 3 to 00-50-BA-50-11-51
Start Time : 2009-08-11 03:18:15
MAC Address
Hop Relay Forwarded
--- ----- ----------------- ----------------- ----------------- ---- --------
1 FDB 00-80-C8-37-18-F1 00-80-C8-37-18-F0 -
Yes
2 Hit 00-50-BA-50-11-51 00-80-C8-37-18-F0 00-50-BA-50-11-51 wan
No
DAS-3626:admin#
delete cfm linktrace
Purpose
Syntax
Description
Parameters
Restrictions
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to show linktrace responses.
show cfm linktrace [mepname <string 32> | mepid <int 1-8191> md <string 22> ma
<string 22>] {trans_id <uint>}
The maximum linktrace responses a device can hold is 64.
<macaddr> – Specifies the destination MAC address.
mepname – Specifies the MEP name.
mepid – MEP MEPID.
md – Specifies the maintenance domain name.
ma – Specifies the maintenance association name.
trans_id – Specifies the identifier of the transaction to show.
None.
Last Egress ID
Next Egress ID
00-80-C8-37-18-F0 00-80-C8-37-18-F1 1
-
This command is used to delete received linktrace responses.
delete cfm linktrace {[md <string 22> {ma <string 22> {mepid <int 1-8191>}} | mepname
<string 32>]}
This command deletes the stored link trace response data that is initiated by the specified
MEP.
mepname – Specifies the MEP name.
mepid – Specifies the MEP MEPID.
md – Specifies the maintenance domain name.
ma – Specifies the maintenance association name.
None.
Reply Ingress MAC Port Action
Reply Egress MAC
-
268
Port Action
- -
Ok
Ok
- -