D-Link DAS-3636 Cli Reference Manual page 435

config vdsl profile [SnrMarginTx|SnrMarginRx]
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To config vdsl profile TX/RX SNR margin
DAS-3626:admin#config vdsl profile name default SnrMarginTx max 20 min 10 target 15
Command: config vdsl profile name default SnrMarginTx max 20 min 10 target 15
Success.
DAS-3626:admin#
config vdsl profile [InterleaveDelayDn|InterleaveDelayUp]
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To config vdsl profile Downstream/Upstream interleave delay
DAS-3626:admin#config vdsl profile name default InterleaveDelayDn 10
Command: config vdsl profile name default InterleaveDelayDn 10
Success.
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to config vdsl profile TX/RX SNR margin
config vdsl profile [<profile_id 1-60>|name <profile_name 32>] [SnrMarginTx|SnrMarginRx]
max <vdsl_snr_max 0-62> min <vdsl_snr_min 0-62> target <vdsl_snr_target 0-62>
This command is used to config vdsl profile TX/RX SNR margin.
<profile_id 1-60>–The profile ID of the profile to be configed
name <profile_name 32>–The name of the profile to be configed
[SnrMarginTx|SnrMarginRx]–To config VDSL profile TX/RX SNR margin
max–maximum SNR margin , increments of 0.5dB.It mean 1 as 0.5dB, 62 as 31dB

 min–minimum SNR margin , increments of 0.5dB.It mean 1 as 0.5dB, 62 as 31dB
 target–target SNR margin , increments of 0.5dB.It mean 1 as 0.5dB, 62 as 31 dB
 <vdsl_snr_target 0-62>–increments of 0.5dB.It mean 1 as 0.5dB, 62 as 31 dB
Only Administrator-level users can issue this command.
Used to config vdsl profile Downstream/Upstream interleave delay
config vdsl profile [<profile_id 1-60>|name <profile_name 32>] [InterleaveDelayDn|
InterleaveDelayUp] <vdsl_inter_delay 0-62>
This command is used to config vdsl profile Downstream/Upstream interleave delay.
<profile_id 1-60>–The profile ID of the profile to be configed
name <profile_name 32>–The name of the profile to be configed
[InterleaveDelayDn|InterleaveDelayUp]–To config VDSL profile Downstream/Upstream
interleave delay
<vdsl_inter_delay 0-62>–interleave delay. Provisioned in steps of 0.5 ms..It mean 1 as
0.5ms, 62 as 31ms
Only Administrator-level users can issue this command.
430