Table of Contents
Advertisement
config dst
Restrictions
Example usage:
To configure daylight savings time on the Switch:
DAS-3626:admin#config dst repeating s_week 2 s_day tue s_mth 4 s_time 15:00 e_week 2
e_day wed e_mth 10 e_time 15:30 offset 30
Command: config dst repeating s_week 2 s_day tue s_mth 4 s_time 15:00 e_week 2 e_day
wed e_mth 10 e_time 15:30 offset 30
Success.
DAS-3626:admin#
show time
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the time currently set on the Switch's System clock:
DAS-3626:admin#show time
Command: show time
Current Time Source
Boot Time
Current Time : 4 Jan 2000
Time Zone
Daylight Saving Time
Offset In Minutes : 60
Repeating
Annual
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
e_time − Configure the time of day to end DST.
•
<end_time hh:mm> − Time is expressed using a 24-hour clock, in hours and
minutes.
s_date − Configure the specific date (day of the month) to begin DST.
•
<start_date 1-31> − The start date is expressed numerically.
e_date − Configure the specific date (day of the month) to begin DST.
•
<end_date 1-31> − The end date is expressed numerically.
offset [30 | 60 | 90 | 120] − Indicates number of minutes to add or to subtract during the
summertime. The possible offset times are 30,60,90,120. The default value is 60.
Only Administrator and Operator-level users can issue this command.
Used to display the current time settings and status.
show time
This command will display system time and date configuration as well as display current
system time.
None.
None.
: System Clock
: 3 Jan 2000
22:45:36
01:56:30
: GMT +00:00
: Disabled
From : Apr 1st
To
: Oct last Sun 00:00
From : 29 Apr 00:00
To
: 12 Oct 00:00
Sun 00:00
124
Advertisement
Table of Contents
