D-Link DAS-3636 Cli Reference Manual page 122

disable snmp authenticate_traps
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the SNMP authentication trap support:
DAS-3626:admin#disable snmp authenticate_traps
Command: disable snmp authenticate_traps
Success.
DAS-3626:admin#
config snmp system_contact
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the Switch contact to "MIS Department II":
DAS-3626:admin#config snmp system_contact MIS Department II
Command: config snmp system_contact MIS Department II
Success.
DAS-3626:admin#
config snmp system_location
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the Switch location for "HQ 5F":
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to disable SNMP authentication trap support.
disable snmp authenticate_traps
This command is used to disable SNMP authentication support on the Switch.
None.
Only Administrator and Operator-level users can issue this command.
Used to enter the name of a contact person who is responsible for the Switch.
config snmp system_contact <sw_contact>
This command is used to enter the name and/or other information to identify a contact person
who is responsible for the Switch. A maximum of 255 character can be used.
<sw_contact> − A maximum of 255 characters is allowed. A NULL string is accepted if there
is no contact.
Only Administrator and Operator-level users can issue this command.
Used to enter a description of the location of the Switch.
config snmp system_location <sw_location>
This command is used to enter a description of the location of the Switch. A maximum of 255
characters can be used.
<sw_location> − A maximum of 255 characters is allowed. A NULL string is accepted if there
is no location desired.
Only Administrator and Operator-level users can issue this command.
117