D-Link DAS-3636 Cli Reference Manual page 472

reset config
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To reset the configuration:
>reset config
Command: reset config
Are you sure you want to proceed with system reset?(y/n) y
Success.
reboot
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To reboot:
>reboot
Command: reboot
Save current setting before system restart?(y/n)y
Please wait, the switch is rebooting...
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to reset the configuration .
reset config { force_agree }
This command is used to reset the configuration parameters. The configuration is reset but
not saved.
force_agree: if this parameter is specified, there will not be the prompt message to ask for
user's confirmation.
None.
Used to exit Reset Configuration Mode and restart the switch.
reboot { force_agree }
This command is used to exit the Reset Configuration Mode and restarts the switch. And it
pops out a confirmation message to save the current setting.
force_agree − If this parameter is specified, there will not be the prompt message to ask for
user's confirmation.
None.
467