D-Link DAS-3636 Cli Reference Manual page 82

show arpentry
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the ARP table:
DAS-3626:admin#show arpentry
Command: show arpentry
ARP Aging Time : 20
Interface IP Address
------------- ---------------
System 10.0.0.0
System 10.24.73.21
System 10.48.74.121
System 10.255.255.255
Total Entries: 4
DAS-3626:admin#
clear arptable
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To remove dynamic entries in the ARP table:
DAS-3626:admin#clear arptable
Command: clear arptable
Success.
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to display the ARP table.
show arpentry {ipif <ipif_name 12> | ipaddress <ipaddr> | static }
This command is used to display the current contents of the Switch's ARP table.
ipif <ipif_name 12> − The name of the IP interface the end node or station for which the ARP
table entry was made, resides on.
ipaddress <ipaddr> − The network address corresponding to the IP interface name above.
static – Displays the static entries to the ARP table.
None.
MAC Address
-----------------
FF-FF-FF-FF-FF-FF
00-01-02-03-04-00
00-50-BA-00-07-36
FF-FF-FF-FF-FF-FF
Used to remove all dynamic ARP table entries.
clear arptable
This command is used to remove dynamic ARP table entries from the Switch's ARP table.
Static ARP table entries are not affected.
None.
Only Administrator and Operator-level users can issue this command.
Type
---------------
Local/Broadcast
Local
Static
Local/Broadcast
77