D-Link DAS-3636 Cli Reference Manual page 158

Example usage:
To create Q-in-Q:
DAS-3626:admin#create qinq v2 spvid 2 tpid 0x88A8
Command: create qinq v2 spvid 2 tpid 0x88A8
Success.
DAS-3626:admin#
delete qinq
Purpose Used to remove Q-in-Q.
Syntax delete qinq <vlan_name >
Description This command is used to remove a previously created Q-in-Q configuration.
<vlan_name > − Specifies the VLAN name of the Q-in-Q configuration.
Parameters
Restrictions None.
Example usage:
To delete Q-in-Q named "v2":
DAS-3626:admin#delete qinq v2
Command: delete qinq v2
Success.
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
153