Table of Contents
Advertisement
Example usage:
To configure the CFM mep:
GS-3700-12:5#config cfm mep mepid 1 md 1 ma 1 state enable ccm enable
Command: config cfm mep mepid 1 md 1 ma 1 state enable ccm enable
Success.
DAS-3626:admin#
delete cfm mep
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete CFM mep:
DAS-3626:admin#delete cfm mep mepname mep1
Command: delete cfm mep mepname mep1
Success.
DAS-3626:admin#
delete cfm ma
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a CFM ma:
DAS-3626:admin#delete cfm ma op1 md 3
Command: delete cfm ma op1 md 3
Success.
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to delete a created MEP.
delete cfm mep [mepname <string 32> | mepid <int 1-8191> md <string 22> ma <string
22>]
This command is used to delete a created MEP.
mepname – Specifies the MEP name. It's unique among all MEPs configured on the device.
mepid – Specifies the MEP MEPID. It should be configured in MA's MEPID list.
md – Specifies the maintenance domain name.
ma – Specifies the maintenance association name.
Only Administrator and Operator-level users can issue this command.
Used to delete a created maintenance association.
delete cfm ma <string 22> md <string 22>
All MEPs created in the maintenance association will be deleted automatically.
md – Specifies the maintenance domain name.
ma – Specifies the maintenance association name.
Only Administrator and Operator-level users can issue this command.
261
Advertisement
Table of Contents
