D-Link DAS-3636 Cli Reference Manual page 181

create igmp_snooping multicast_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create IGMP multicast VLAN RG 11:
DAS-3626:admin# create igmp_snooping multicast_vlan RG 11
Command: create igmp_snooping multicast_vlan RG 11
Success.
DAS-3626:admin#
config igmp_snooping multicast_vlan
Purpose
Syntax
Description
Parameters
Restrictions
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to create an IGMP multicast VLAN
create igmp_snooping multicast_vlan <vlan_name 32> <vlanid 2-4094>.
This command is used to create an IGMP multicast_vlan. Multiple multicast VLAN can be
configured.
The IGMP multicast VLAN being created can not exist in the 1Q VLAN database. Multiple
IGMP multicast VLAN can be created. The IGMP multicast VLAN snooping function co-exist
with the 1Q VLAN snooping function.
<vlan_name> − The name of the VLAN to be created. Each multicast VLAN is given a name
that can be up to 32 characters.
vlanid – The VLAN ID of the multicast VLAN to be create. The range is 2-4094
Only Administrator and Operator-level users can issue this command.
Used to configure the parameter of the specific IGMP multicast VLAN.
config igmp_snooping multicast_vlan <vlan_name 32> {[add|delete] [member_port
<portlist>| tag_member_port <portlist> | source_port <portlist>] | state [enable |
disable] | replace_source_ip <ipaddr>}
This command allows you to add a member port, add a tag member port, and add a source
port to the port list. The member port will automatically become the untagged member of the
IGMP multicast VLAN, the tag member port and the source port will automatically become
the tagged member of the IGMP multicast VLAN. To change the port list, the new port list will
replace the previous port list if the add or delete is not specified.
The member port list and source port list can not overlap. However, the member port of one
IGMP multicast VLAN can overlap with another IGMP multicast VLAN.
The IGMP multicast VLAN must be created first before configuration.
<vlan_name> − The name of the VLAN to be created. Each multicast VLAN is given a name
that can be up to 32 characters.
Member_port – A range of member ports to add to the multicast VLAN. They will become the
untagged member port of the IGMP multicast VLAN.
tag_member_port − Specifies the tagged member port of the IGMP multicast VLAN.
source_port − A range of source ports to add to the multicast VLAN.
state − enable or disable multicast VLAN for the chosen VLAN.
replace_source_ip − With the IGMP snooping function, the IGMP report packet sent by the
host will be forwarded to the source port. Before forwarding of the packet, the source IP
address in the join packet needs to replaced by this IP address.
Only Administrator and Operator-level users can issue this command.
176