D-Link DAS-3636 Cli Reference Manual page 247

config stp mst_ports
Restrictions
Example usage:
To designate ports 1 through 5, with instance id 2, to have an auto internalCost and a priority of 16:
DAS-3626:admin#config stp mst_ports 1-5 instance_id 2 internalCost auto priority 16
Command : config stp mst_ports 1-5 instance_id 2 internalCost auto priority 16
Success.
DAS-3626:admin#
show stp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the status of STP on the Switch:
Status 1: STP enabled with STP compatible version
DAS-3626:admin#show stp
Command: show stp
STP Bridge Global Settings
---------------------------
STP Status
STP Version
Max Age
Hello Time
Forward Delay
Max Hops
TX Hold Count
Forwarding BPDU
NNI BPDU Address
DAS-3626:admin#
Status 2 : STP enabled for RSTP
DAS-3626:admin#show stp
Command: show stp
STP Bridge Global Settings
---------------------------
STP Status
STP Version
Max Age
Hello Time
Forward Delay
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Only Administrator and Operator-level users can issue this command.
Used to display the Switch's current STP configuration.
show stp
This command displays the Switch's current STP configuration.
None.
None.
: Enabled
: STP compatible
: 18
: 2
: 15
: 15
: 6
: Disabled
: dot1d
: Enabled
: RSTP
: 20
: 2
: 15
242