Table of Contents
Advertisement
DAS-3626:admin#config command_prompt AtYourService
Command: config command_prompt AtYourService
Success.
AtYourService:admin5#
Restrictions
Example usage:
To modify the banner:
DAS-3626:admin#config greeting_message
Command: config greeting_message
Greeting Messages Editor
===========================================================================
Copyright(C) 2009 D-Link Corporation. All rights reserved.
===========================================================================
<Function Key>
Ctrl+C
Quit without save
Ctrl+W
Save and quit
---------------------------------------------------------------------------
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Only Administrator and Operator-level users can issue this command. Other restrictions
include:
•
If the "reset" command is executed, the modified banner will remain modified.
However, the "reset config/reset system" command will reset the modified banner
to the original factory banner.
•
The capacity of the banner is 6*80. 6 Lines and 80 characters per line.
•
Ctrl+W will only save the modified banner in the DRAM. Users need to type the
"save" command to save it into FLASH.
•
Only valid in threshold level.
DAS-3626 VDSL2 Switch
Command Line Interface
Firmware: Build 1.00.B042
<Control Key>
left/right/
up/down
Move cursor
Ctrl+D
Delete line
Ctrl+X
Erase all setting
Ctrl+L
Reload original setting
30
Advertisement
Table of Contents
