The Q-in-Q commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following
table.
Command
enable qinq
disable qinq
show qinq
create qinq
delete qinq
config qinq
Each command is listed, in detail, in the following sections.
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Parameters
<vlan_name 32> spvid <vlanid 1-4094> {tpid <hex 0x0-0xffff>}
<vlan_name>
<vlan_name> {[add [uplink|access] | delete ] <portlist> | tpid <hex 0x0-0xffff> |
802.1p [<priority 0-7> | none] }(1)
150
18
Q-
-Q C
IN
OMMANDS