D-Link DAS-3636 Cli Reference Manual page 61

config mcast_filter_profile ipv6
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To config an IPv6 mcast_filter_ profile:
DAS-3626:admin#config mcast_filter_profile ipv6 profile_id 2 add FF12::1-FF12::1
Command: config mcast_filter_profile ipv6 profile_id 2 add FF12::1
Success.
DAS-3626:admin#
delete mcast_filter_profile profile_id
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a multicast filter profile:
DAS-3626:admin#delete mcast_filter_profile profile_id ipv4 2
Command: delete mcast_filter_profile profile_id ipv4 2
Success.
DAS-3626:admin#delete mcast_filter_profile profile_id ipv6 2
Command: delete mcast_filter_profile profile_id ipv6 2
Success.
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
This command adds or deletes a range of IPv6 multicast addresses to the profile.
config mcast_filter_profile ipv6 [profile_id < value 1-60>| profile_name <name 1-32> ]
{ profile_name <name 1-32> | [add | delete ] <mcastv6_address_list>}
This command allows the user to add or delete a range of multicast IPv6 addresses
previously defined.
profile_id – ID of the profile. Range is from 1 to 60.
profile_name – Provides a meaningful description for the profile.
mcast_address_list – List of the IPv6 multicast addresses to be put in the profile.
You can either specifiy a single IPv6 multicast IP address or a range of IPv6 multicast
addresses.
Only Administrator and Operator-level users can issue this command.
This command deletes a multicast address profile.
delete mcast_filter_profile profile_id {[ipv4|ipv6]} [<value 1-60> | all]
This command deletes a multicast address profile.
profile_id − ID of the profile.
all − All multicast address profiles will be deleted.
Only Administrator and Operator-level users can issue this command.
56