D-Link DAS-3636 Cli Reference Manual page 194

enable/disable mld_snooping multicast_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable MLD Multicast VLAN:
DAS-3626:admin#enable mld_snooping multicast_vlan
Command: enable mld_snooping multicast_vlan
Success.
DAS-3626:admin#
show mld_snooping multicast_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show MLD multicast VLAN:
DAS-3626:admin#show mld_snooping multicast_vlan mv1
Command: show mld_snooping multicast_vlan mv1
MLD Multicast VLAN Global State
VLAN Name
VID
Member(Untagged) Ports
Tagged Member Ports
Source Ports
Status
Replace Source IP
Total Entry: 1
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to enable/disable the MLD Multicast VLAN function.
enable mld_snooping multicast_vlan
disable mld_snooping multicast_vlan
This command controls the MLD Multicast VLAN function. The MLD Multicast VLAN will take
effect when MLD snooping multicast VLAN is enabled. By default, the MLD Multicast VLAN is
in a disabled state.
None.
Only Administrator and Operator-level users can issue this command.
Used to show the information of MLD multicast VLAN.
show mld_snooping multicast_vlan {<vlan_name 32>}
This command is used to show the information of an MLD multicast VLAN.
<vlan_name> − The name of the multicast VLAN to be shown. If not specified, all MLD
multicast VLANs will be displayed.
None.
: mv1
: 23
:
:
:
: Disabled
: ::
: Disabled
189