D-Link DAS-3636 Cli Reference Manual page 206

Vdsl2 switch release 1.00
Table of Contents

Advertisement

delete mld_snooping static_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a static group FF12::1 on VID 1:
DAS-3626:admin#delete mld_snooping static_group vlanid 1
Command: delete mld_snooping static_group vlanid 1
Success.
DAS-3626:admin#
config mld_snooping static_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To add port 5 to static group FF12::1 on VID 1:
DAS-3626:admin#config mld_snooping static_group vlanid 1
Command: config mld_snooping static_group vlanid 1
Success.
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to delete the current MLD snooping static group on the Switch.
delete mld_snooping static_group [vlan <vlan_name 32> | vlanid < vlanid_list > ]
<ipv6addr>
This command is used to delete an MLD snooping static group will not affect the MLD
snooping dynamic member ports of a group.
<vlan_name 32> − The name of the VLAN for which MLD snooping static group information
will be deleted.
<vlanid_list> − The list of the VLAN IDs for which MLD snooping static group information will
be deleted.
< ipv6addr > − The static group IPv6 address for which MLD snooping static group
information will be deleted.
Only Administrator and Operator-level users can issue this command.
Used to configure the current MLD snooping static group on the Switch.
config mld_snooping static_group [ vlan <vlan_name 32> | vlanid <vlanid_list> ]
<ipv6addr> [ add | delete] <portlist>
This command is used to add or delete ports to/from the given static group.
<vlan_name 32> − The name of the VLAN for which to configure MLD snooping static group
information.
<vlanid_list> − The list of the VLAN IDs for which to configure MLD snooping static group
information.
< ipv6addr > − The static group IPv6 address for which to configure MLD snooping static
group information.
[ add | delete] <portlist> − Portlist to add or delete.
Only Administrator and Operator-level users can issue this command.
FF12::1
FF12::1
FF12::1 add 5
FF12::1 add 5
201

Advertisement

Table of Contents
loading

Table of Contents