D-Link DAS-3636 Cli Reference Manual page 383

DAS-3626:admin#show authen server_host
Command: show authen server_host
IP Address Protocol
----------- --------
10.53.13.94 TACACS
Total Entries : 1
DAS-3626:admin#
create authen server_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create the server group "group_1":
DAS-3626:admin#create authen server_group group_1
Command: create authen server_group group_1
Success.
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Port Timeout
----- -------
49
Used to create a user-defined authentication server group.
create authen server_group {<string 15>}
This command will create an authentication server group. A server group is a technique used
to group TACACS/XTACACS/TACACS+/RADIUS server hosts into user defined categories
for authentication using method lists. The user may add up to eight authentication server
hosts to this group using the config authen server_group command.
<string 15> − Enter an alphanumeric string of up to 15 characters to define the newly created
server group.
Only Administrator-level users can issue this command.
Retransmit
----------
5 2
378
Key
-----
No Use