Delete Snmp User - D-Link DAS-3636 Cli Reference Manual

delete snmp user

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a previously entered SNMP user on the Switch:
DAS-3626:admin#delete snmp user dlink
Command: delete snmp user dlink
Success.
DAS-3626:admin#
show snmp user
Purpose Used to display information about each SNMP username in the SNMP group username table.
Syntax show snmp user
Description This command is used to display information about each SNMP username in the SNMP group
username table.
Parameters None.
Restrictions None.
Example usage:
To display the SNMP users currently configured on the Switch:
DAS-3626:admin#show snmp user
Command: show snmp user
Username Group Name
-------- -------------
initial initial
Total Entries: 1
DAS-3626:admin#
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Used to remove an SNMP user from an SNMP group and also to delete the associated
SNMP group.
delete snmp user <user_name 32>
This command is used to remove an SNMP user from its SNMP group and then deletes the
associated SNMP group.
<user_name 32> − An alphanumeric string of up to 32 characters that identifies the SNMP
user that will be deleted.
Only Administrator-level users can issue this command.
VerAuthPriv
-----------
V3 NoneNone
89