D-Link DAS-3636 Cli Reference Manual page 69

DAS-3626:admin#show ports description
Command: show ports description
Port Port
State
------- --------
1 Enabled
Description:
2 Enabled
Description:
3 Enabled
Description:
4 Enabled
Description:
5 Enabled
Description:
6 Enabled
Description:
7 Enabled
Description:
8 Enabled
Description:
DAS-3626:admin#
Example usage:
To display disabled ports including connection status and reason for being disabled on a standalone switch:
DAS-3626:admin#show ports err_disabled
Command: show ports err_disabled
Port Port
State
----- --------
DAS-3626:admin#
enable jumbo_frame
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the jumbo frame:
DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Settings
Speed/Duplex/FlowCtrl
---------------------
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
NOTE: Connection status displays the following status: Link Down,
Speed/Duplex/FlowCtrl (link up), or Err-Disabled.
Connection Status
---------------------
Used to enable the jumbo frame function on the Switch.
enable jumbo_frame
This command will allow ethernet frames larger than 1536 bytes to be processed by the
Switch. The maximum size of the jumbo frame may not exceed 10240 Bytes tagged.
None.
Only Administrator and Operator-level users can issue this command.
Connection
Speed/Duplex/FlowCtrl
----------------------
Link Down
Link Down
VDSL/None
Link Down
Link Down
Link Down
VDSL/None
Link Down
Reason
----------------
64
Address
Learning
---------
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled