Command Syntax - D-Link DGS-3100 SERIES Cli Manual

The following symbols are used to describe how command entries are made and values and arguments
are specified in this manual. The online help contained in the CLI and available through the console
interface uses the same syntax.
NOTE: All commands are case-sensitive. Be sure to disable Caps Lock or any other unwanted
function that changes text case.
<angle brackets>
Purpose
Syntax
Description
Example
Command
[square brackets]
Purpose
Syntax
Description
Example
Command
| vertical bar
Purpose
Syntax
Description
Example
Command
All commands are case-sensitive. Be sure to disable Caps Lock or any other unwanted function that
changes text case.
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
Encloses a variable or value that must be specified.
create account [admin | oper |user] <username 15>
In the above syntax example, supply a username in the
<username> space. Do not type the angle brackets.
create account admin newadmin1
Encloses a required value or set of required arguments. One value
or argument can be specified.
create account [admin | oper |user] <username 15>
In the above syntax example, specify admin, oper or a user level
account to be created. Do not type the square brackets.
create account user newuser1
Separates two or more mutually exclusive items in a list, one of
which must be entered.
create account [admin | oper | user] <username 15>
In the above syntax example, specify admin, oper, or user. Do not
type the vertical bar.
create account user newuser1

COMMAND SYNTAX

3
8