Table of Contents
Advertisement
The following symbols are used to describe how command entries are made and values and arguments are specified in this
manual. The online help contained in the CLI and available through the console interface uses the same syntax.
<angle brackets>
Purpose
Syntax
Description
Example
Command
[square brackets]
Purpose
Syntax
Description
Example
Command
| vertical bar
Purpose
Syntax
Description
Example
Command
{braces}
Purpose
Syntax
Note: All commands are case-sensitive. Be sure to disable Caps Lock or any other
unwanted function that changes text case.
Encloses a variable or value that must be specified.
create ipif <ipif_name> vlan <vlan_name 32> ipaddress
<network_address>
In the above syntax example, you must supply an IP interface name in
the <ipif_name> space, a VLAN name in the <vlan_name 32> space,
and the network address in the <network_address> space. Do not
type the angle brackets.
create ipif Engineering vlan Design ipaddress 10.24.22.5/255.0.0.0
Encloses a required value or set of required arguments. One value or
argument can be specified.
create account [admin|user]
In the above syntax example, you must specify either an admin or a
user level account to be created. Do not type the square brackets.
create account admin
Separates two or more mutually exclusive items in a list, one of which
must be entered.
show snmp [community|detail]
In the above syntax example, you must specify either community, or
detail. Do not type the backslash.
show snmp community
Encloses an optional value or set of optional arguments.
reset {[config|system]}
C
8
3
S
OMMAND
YNTAX
Advertisement
Table of Contents
