Rep 10.2.1 Fuser Fan - Xerox DocuColor 12/DCCS50 Service Manual

REP 10.2.1 Fuser Fan

Parts List on PL 10.2
Removal
Turn power off and disconnect the power plug.
1. Open/close the IOT Control PWB Chassis
2. Remove the Fuser Cover (Figure 1).
1. Disconnect the connector.
2. Remove the Fuser Cover.
Figure 1 Remove the Fuser Cover
3. Remove the Fuser Fan (Figure 2).
1. Remove the Fuser Fan.
Reissue
DocuColor 12/DCCS50
WARNING
(REP 9.2.1).
Figure 2 Remove the Fuser Fan
Installation
1. Reinstall the parts in the reverse order of disassembly.
1/05
4-151
Repairs and Adjustments
REP 10.2.1