Xerox DocuColor 12/DCCS50 Service Manual page 730

Table 1 PH NVM List (761)
Chain-
Link Name Default
761-042 ADJUST REGI 32
LOOP(DUPLEX
MODE)
761-043 REGI MOTOR ON 3962
TIMING(PANEL A &
B)
761-044 ADJUST REGI 86
MOTOR ON TIM-
ING(PANEL B & 17
INCH PAPER)
761-045 ADJUST REGI 4800
MOTOR ON TIM-
ING(THICK
PAPER)
761-046 ADJUST REGI 4800
MOTOR ON TIM-
ING(STRONG
THICK PAPER)
General Procedures
dC131PH NVM List (761)
Range Description
7-57 Time from Registration SENSOR ON to
Main Motor 2, DUP Motor OFF (Registra-
tion Loop adjustment - Duplex)
Default=64 ms
Range=±50ms (±25)
Unit=2ms/step
Default DATA=32 (2ms RTMR)
3862- Time from the last image Pitch generation
4062 to Registration Motor ON (Applied to all
modes.)
Default=1981ms
Range=±50ms (±100)
Unit=0.5ms/step, 0.11mm/step
0-186 Time from the last image Pitch generation
to Registration Motor ON
(Adjusting value when the B side feed
length is longer than A3) B side or feed
length is longer than 420mm=(761-043) -
(761-044)
Default=43ms
Range=0-93ms (0-186)
Unit=0.5ms/step, 0.11mm/step
4700- Time from the last image Pitch generation
4900 to Registration Motor ON
(Thick paper adjusting value) Thick paper
Timing (420mm or less)=(761-043) +
(761-045) Thick paper Timing (longer
than 420mm)=(761-043) + (761-045) -
(761-044)
Default=2400ms
Range=±50ms (±100)
Unit=0.5ms/step, 0.11mm/step
4700- Time from the last image Pitch generation
4900 to Registration Motor ON
(Ultra thick paper adjusting value) Ultra
thick paper Timing (420mm or less)=(761-
043)+(761-046) Ultra thick paper Timing
(Longer than 420mm)=(761-043)+(761-
046) -(761-044)
Default=2400ms
Range=±50ms (±100)
Unit=0.5ms/step, 0.11mm/step
Chain-
Link Name
761-048 ADJUST REGI
MOTOR ON TIM-
ING (DUPLEX
MODE)
761-049 ADJUST REGI
MOTOR ON TIM-
ING(OHP FULL
COLOR MODE)
761-050 ADJUST REGI
MOTOR
SPEED(NORMAL
PAPER:221.168mm
/s)
761-051 ADJUST REGI
MOTOR
SPEED(STRONG
THICK PAPER:
130mm/s)
761-052 ADJUST REGI
MOTOR
SPEED(OHP:
60.301mm/s)
761-053 Tray 5 FEED
CLUTCH ON TIM-
ING
1/05
6-50
manuals4you.com manuals4you.com
Table 1 PH NVM List (761)
Default Range Description
1000 900- Time from the last image Pitch generation
1100 to Registration Motor ON
(Duplex Mode adjusting value) Duplex
Registration Feed Timing=(761-
043)+(761-048)-1000
Default=0ms
Range=±50ms (±100)
Unit=0.5ms/step, 0.11mm/step
4800 4700- Time from the last image Pitch generation
4900 to Registration Motor ON
(4C OHP adjusting value) OHP Timing
(420mm or less)=(761-043)+(761-
049)OHP Timing (Longer than
420mm)=(761-043) +(761-049) -(761-
044)
Default=2400ms
Range=±50ms (±100)
Unit=0.5ms/step, 0.11mm/step
2680 2546- Registration Feed: Registration Motor
2814 speed
(Normal paper) Dividing
ratio=20MHz÷Octant division÷Fre-
quency÷2+1
Default=2680PPS
Range=2546-2814PPS (2546-2814)
1583 1503- Registration Feed: Registration Motor
1662 speed
(Thick paper) Dividing
ratio=20MHz÷Octant division÷Fre-
quency÷2+1
Default=1583PPS
Range=1503-1662PPS (1503-1662)
731 694-768 Registration Feed: Registration Motor
speed
(OHP) Dividing ratio=20MHz÷Octant divi-
sion÷Frequency÷2+1
0 None Time from Tray 5 Nudger Solenoid ON to
Tray 5 Feed Clutch OFF
unit=10ms/step
DocuColor 12/DCCS50
Reissue