Rep 2.6.1 Feed Lift Motor - Xerox DocuColor 12/DCCS50 Service Manual

REP 2.6.1 Feed Lift Motor

Parts List on PL 2.6
Removal
NOTE: This page describes how to remove the Tray 1Feed Lift Motor.
Turn power off and disconnect the power plug.
1. Pull out the Tray 1 Feeder (REP 2.4.1).
2. Remove the bracket (Figure 1).
1. Remove the screws (4).
2. Remove the screws (2).
3. Remove the E-clip and bearings.
4. Remove the bracket.
Figure 1 Removing the Bracket
3. Remove the Feed Lift Motor (Figure
1. Remove the screws (2).
2. Remove the Feed Lift Motor.
3. Disconnect the connector.
Repairs and Adjustments
REP 2.6.1
WARNING
2).
Figure 2 Removing the Feed Lift Motor
Installation
NOTE: Do not mistake the solenoid mounting screw for the bracket mounting screw.
1. Reinstall the parts in the reverse order of disassembly.
1/05
4-20
manuals4you.com manuals4you.com
Reissue
DocuColor 12/DCCS50