Adj 9.1.17 Tray 5 Guide (Dc740) - Xerox DocuColor 12/DCCS50 Service Manual

ADJ 9.1.17 Tray 5 Guide (dC740)

Purpose
To check if the width direction size of the Tray 5 guide is being correctly detected.
1. To set the sensor output values for the minimum/maximum position of the guide.
2. To display the result of the width direction size detection.
Adjustment
1. Enter dC740 Tray 5 Guide Adjustment.
2. Move the Tray 5 guide to the minimum position.
3. Select Set at the minimum position on the PWS screen. Click Start.
4. If OK, go to Step 5.
If NG:
a. Enter dC131 NVM Read/Write
Size Sensor Analog Value).
b. Enter the recorded value into loc. [760-002] Tray 5 Size Sensor analog smallest
Value. Exit dC131.
5. Move the Tray 5 guide to the maximum position.
6. Enter dC740 Tray 5 Guide Adjustment. Select Set at the maximum position on the PWS
screen. Click Start.
7. If OK, go to Step 8.
If NG:
a. Enter the dC131 NVM Read/Write
Analog Value) data.
b. Enter the 760-001 data in the 760-002 Tray 5 Size Sensor analog smallest Value.
Exit dC131.
8. If the Minimum and Maximum are being set, all sizes are automatically adjusted. If a par-
ticular size sheet causes a problem, check the following.
9. Set the particular paper sheet in Tray 5 and adjust the guide accordingly.
10. Enter the dC740 Tray 5 Guide Adjustment. Select Guide Test" in the PWS screen. Click
Start."
The paper size group is displayed in the result window in the PWS screen.
11. Consult the table below and check if the correct group is displayed for the particular paper
type. If an incorrect group is displayed, repeat Steps 2 - 7.
Table 1 Paper Size Groups
Displayed paper
group A/D range Paper
Postcard 3FF`385 Postcard S
Postcard 3FF`385 A6S
A5SEF 385`2AC B6S
A5SEF 385`2AC 5.5"~8.5"S
A5SEF 385`2AC A5S
B5SEF 2AB`223 B5S
A4SEF 222`177 A5L
Reissue
DocuColor 12/DCCS50
and record the value in location [760-001] (Tray 5
and record the NVM (760-001 Tray 5 Size Sensor
Width (mm)
100
105
128
139.7
148
182
210
Table 1 Paper Size Groups
Displayed paper
group A/D range Paper
A4SEF 222`177 A4S
A4SEF 222`177 8.5"~11"S
A4SEF 222`177 8.5"~12.4"S
A4SEF 222`177 8.5"~13"S
A4SEF 222`177 8.5"~14"S
B4SEF 176`8D 8"~10L
B4SEF 176`8D B5L
B4SEF 176`8D B4S
B4SEF 176`8D TFX Special Paper
L
B4SEF 176`8D TFX Special Paper
S
B4SEF 176`8D 8.5"~11"L
B4SEF 176`8D 11"~17"S
A3SEF 8C`00 A4L
A3SEF 8C`00 A3S
A3SEF 8C`00 12"~18S"
A3SEF 8C`00 12.6"~18S"
1/05
4-211
Width (mm)
210
215.9
215.9
215.9
215.9
254
257
257
267
267
279.4
279.4
297
297
304.8
320
Repairs and Adjustments
ADJ 9.1.17