Rep 4.1.1 Ros - Xerox DocuColor 12/DCCS50 Service Manual

REP 4.1.1 ROS

Parts List on PL 4.1
Removal
Turn power off and disconnect the power plug.
The ROS assembly is a precision optical component. Be careful not to damage the unit when
handling it.
1. Open/close the IIT (REP 3.1.2).
2. Remove the Half Tone PWB Cover
1. Remove the screws (2).
2. Remove the Half Tone PWB Cover.
Figure 1 Remove the Half Tone PWB Cover
3. Remove the ROS Top Cover (Figure
1. Remove the screws (3).
2. Remove the ROS Top Cover.
Reissue
DocuColor 12/DCCS50
WARNING
CAUTION
(Figure 1).
2).
Figure 2 Remove the ROS Top Cover
4. Disconnect the connectors (Figure
1. Disconnect the connectors (3).
1/05
4-65
3).
Repairs and Adjustments
REP 4.1.1