Rep 9.3.1 Power Chassis - Xerox DocuColor 12/DCCS50 Service Manual

REP 9.3.1 Power Chassis

Parts List on PL 9.3
Removal
Turn power off and disconnect the power plug.
1. Remove the following covers.
a. Tray Module Rear Cover (PL 11.3)
b. Filter Unit Cover (PL 11.2)
c. Power Chassis Cover (PL 11.2)
2. Remove the duct (Figure 1).
1. Remove the screws (2).
2. Release the hook and remove the duct.
Figure 1 Remove the Duct
3. Remove the Suction Blower (Figure
1. Disconnect the connector.
2. Remove the screws (2).
3. Remove the Suction Blower.
Reissue
DocuColor 12/DCCS50
WARNING
2).
Figure 2 Remove the Suction Blower
4. Remove the screws (large: 1/small:3) of the AC Drive PWB. Keep the AC Drive PWB con-
nector connected (Figure 3).
1. Remove the screw (large: 1).
2. Remove the screws (small: 2).
1/05
4-143
Repairs and Adjustments
REP 9.3.1