REP 2.7.3 T/A Motor
Parts List on
PL 2.7A
Removal
Turn power off and disconnect the power plug.
1.
Remove the Tray 2-4 Take Away Drive
2.
Remove the T/A Motor
(Figure
1).
1. Disconnect the connector.
2. Remove the screws (2).
3. Remove the T/A Motor.
Figure 1 Removing the T/A Motor
Installation
1.
Reinstall the parts in the reverse order of disassembly.
Repairs and Adjustments
REP 2.7.3, REP 2.8.1
WARNING
(REP
2.7.1).
REP 2.8.1 Tray 1 Feed-out Sensor, T/A Sensor
Parts List on
PL 2.8
Removal
Turn power off and disconnect the power plug.
1.
Open the Left Lower Cover.
2.
Move the baffle in the direction shown and remove it
1. Remove the baffle.
2. Remove the springs (2).
3.
Move the sensor with the bracket
1. Remove the screw.
2. Remove the bracket.
1/05
4-24
manuals4you.com
manuals4you.com
WARNING
(Figure
1).
Figure 1 Removing the Baffle
(Figure
2).
DocuColor 12/DCCS50
Reissue