Figure 1 Remove the Bracket (Front of Fuser)
5.
Disconnect the connector
(Figure
1. Release the clamp and remove the wire.
2. Disconnect the connector.
3. Remove the screw.
4. Remove the bracket.
Reissue
DocuColor 12/DCCS50
2).
Figure 2 Disconnect the Connector (Rear of Fuser)
6.
Remove the Heat Roll Heater Rod
1. Remove the Heat Roll Heater Rod.
1/05
4-121
(Figure
3).
Repairs and Adjustments
REP 8.3.2