Rep 5.4.1 Charge Corotron; Rep 5.4.2 Pcc Wire - Xerox DocuColor 12/DCCS50 Service Manual

REP 5.4.1 Charge Corotron

Parts List on PL 5.4
Removal
Turn power off and disconnect the power plug.
NOTE: When removing the Drum Unit, do not expose the Drum to direct sunlight or strong
light.
NOTE: Do not touch the Drum surface.
1. Remove the Drum Unit (REP 5.3.1).
2. Remove the Charge Corotron (Figure
1. Remove the screw.
2. Remove the Charge Corotron.
Figure 1 Remove the Charge Corotron
Installation
NOTE: Do not touch the Corotron Wire during installation.
1. Reinstall the parts in the reverse order of disassembly.
Reissue
DocuColor 12/DCCS50
WARNING
1).

REP 5.4.2 PCC Wire

Parts List on PL 5.4
Removal
Turn power off and disconnect the power plug.
NOTE: When removing the Drum Unit, do not expose the Drum to direct sunlight or strong
light.
NOTE: Do not touch the Drum surface.
1. Remove the Drum (REP 5.3.1).
2. Remove the Pre-Clean Corotron
1. Remove the screw.
2. Remove the Pre-Clean Corotron.
Figure 1 Remove the Pre-Clean Corotron
3. Remove the PCC Wire (Figure
1. Remove the Arc Shields on both sides.
2. Remove the spring.
3. Remove the PCC Wire.
1/05
4-71
WARNING
(Figure 1).
2).
Repairs and Adjustments
REP 5.4.1, REP 5.4.2