Table of Contents
Advertisement
14-388 XPC ASIC Fail RAP
The Control Logic detected a ROS Pickup ASIC Failure
Initial Actions
•
Refer to BSD 1.1, BSD 6.6 and BSD 6.7 in the following procedure:
•
Ensure that
P/J398
on the Halftone PWB and the
are fully seated.
•
Go to
Flag 2
and
Flag 3
on BSD 6.5 and check the wires for an open or shorted circuit.
Procedure
PO/PO the machine. If the fault continues, go to
Reissue
DocuColor 12/DCCS50
P/J345
and
P/J341
on the LDD PWB
14-376 Half Tone PWB Fail
RAP.
1/05
2-217
Status Indicator RAPs
14-388 XPC ASIC Fail RAP
Advertisement
Table of Contents
Troubleshooting
