Rep 2.11.1 Tray 5 Nudger Roll - Xerox DocuColor 12/DCCS50 Service Manual

REP 2.11.1 Tray 5 Nudger Roll

Parts List on PL 2.11
Removal
NOTE: After replacing the Nudger Roll, clear the HFSI counter [08-810].
NOTE: Replace the Tray 5 Nudger, Feed and Retard Rolls at the same time.
Turn power off and disconnect the power plug.
1. Open the Tray 5 Assembly (Figure
1. Pull the lever up and open the Upper Tray 5 Assembly.
Figure 1 Opening the Tray 5 Assembly
2. Remove the Tray 5 Nudger Roll (Figure
1. Remove the KL-clip.
2. Push in the plunger.
3. Remove the Nudger Roll.
Repairs and Adjustments
REP 2.11.1
WARNING
1).
2).
Figure 2 Removing the Tray 5 Nudger Roll
Installation
1. Reinstall the parts in the reverse order of disassembly.
1/05
4-28
manuals4you.com manuals4you.com
Reissue
DocuColor 12/DCCS50