Rep 2.21.1 Duplex Path Sensor - Xerox DocuColor 12/DCCS50 Service Manual

Figure 2 Removing the Vacuum Transport Belt
Installation
NOTE: When installing the Vacuum Transport Belt, make sure the shiny side is inside.
1. Reinstall the parts in the reverse order of disassembly.
Reissue
DocuColor 12/DCCS50

REP 2.21.1 Duplex Path Sensor

Parts List on PL 2.21
Removal
Turn power off and disconnect the power plug.
1. Open the Front Door.
2. Remove the Vacuum Transport
3. Remove the Duplex Path Sensor with the bracket
1. Disconnect the connector.
2. Remove the screw.
3. Remove the bracket.
Figure 1 Removing the Bracket
4. Remove the Duplex Path Sensor from the sensor bracket
1. Remove the Duplex Path Sensor.
1/05
4-41
WARNING
(REP 2.17.1).
(Figure 1).
(Figure 2).
Repairs and Adjustments
REP 2.17.2, REP 2.21.1