Rep 6.1.3 Rotary Latch Lever - Xerox DocuColor 12/DCCS50 Service Manual

Figure 2 Position the Bracket
2. Adjust the Rotary Home Position Sensor
Reissue
DocuColor 12/DCCS50
(ADJ 6.1.1).

REP 6.1.3 Rotary Latch Lever

Parts List on PL 6.1
Removal
Turn power off and disconnect the power plug.
1. Remove the Right Upper Cover
2. Remove the Rotary PWB (Steps 1 - 3 of
3. Disconnect the connector (Figure
1. Loosen the screws (2).
2. Disconnect the connectors (3).
3. Release the clamps (2) and remove the wire.
4. Pull out the connector from the hole.
Figure 1 Disconnect the Connectors
4. Hook the bracket hooks (Figure
1. Hook the bracket hooks (2).
1/05
4-79
WARNING
(PL 11.2 Item 1)
REP 6.1.1)
1).
2).
Repairs and Adjustments
REP 6.1.2, REP 6.1.3