Removing The Filter Case - Xerox DocuColor 12/DCCS50 Service Manual

Figure 2 Removing the Filter Case
5. Lower the IOT Control PWB Chassis
6. Remove the Filter Duct (PL 10.2 Item
1. Remove the screws (2).
2. Remove the duct.
Repairs and Adjustments
REP 1.6.3
(REP 9.2.1).
2) (Figure 3)
7. Remove Inverter 2 (REP
8. Remove Inverter 1 (REP
NOTE: Exit/Fuser Nip Drive Assembly is mounted on the rear frame at the top of the
inverter opening
9. Remove the Exit/Fuser Nip Drive Assembly
1/05
4-14
manuals4you.com manuals4you.com
Figure 3 Removing the Duct
2.23.2).
2.23.1).
(Figure 4 and Figure 5).
Reissue
DocuColor 12/DCCS50