Rep 10.4 Fuser Fan Duct Assembly - Xerox VersaLink B7025 Service Manual

REP 10.4 Fuser Fan Duct Assembly

Parts List on PL 40.15
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the upper rear cover, REP
2. Remove the fuser rear duct A, Figure
a. Disconnect the connector (1).
b. Remove the screw (2).
c. Disengage the right and left hooks (3), then remove the fuser rear duct A (4).
Figure 1 Fuser rear duct A removal
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord
28.5.
1:
3. Remove the fuser rear duct B (1),
Figure 2 Fuser rear duct B removal
Replacement
The replacement is the reverse of the removal procedure.
April 2017
4-53
Figure 2.
Repairs and Adjustments
REP 10.4