REP 10.2.2 Suction Blower Motor
Parts List on
PL 10.2
Removal
Turn power off and disconnect the power plug.
1.
Remove the following part:
a.
Tray Module Rear Cover
(PL
11.3)
2.
Remove the duct
(Figure
1).
1. Remove the screws (2).
2. Release the hook and remove the duct.
Figure 1 Remove the Duct
3.
Remove the Suction Blower Motor
1. Disconnect the connector.
2. Remove the screws (2).
3. Remove the Suction Blower Motor.
Repairs and Adjustments
REP 10.2.2
WARNING
(Figure
2).
Figure 2 Remove the Suction Blower Motor
Installation
1.
Reinstall the parts in the reverse order of disassembly.
1/05
4-152
manuals4you.com
manuals4you.com
Reissue
DocuColor 12/DCCS50