Xerox DocuColor 12/DCCS50 Service Manual page 458

Figure 2 Disconnect the Connectors - Rear of Fuser
6. Remove the External Heat Roll Assembly
1. Remove the KL-clips (2).
2. Move the bearing in the direction of the arrow.
3. Remove the External Heat Roll Assembly.
Repairs and Adjustments
REP 8.8.1
(Figure 3).
Figure 3 Remove the External Heat Roll Assembly
7. Remove the brackets (Figure
1. Release the clamps (2) and remove the wire.
2. Remove the screws (2).
3. Remove the brackets (2).
4. Clean the External Heat Roll Assembly.
1/05
4-134
manuals4you.com manuals4you.com
4).
DocuColor 12/DCCS50
Reissue