Rep 2.21.2 Duplex Out Sensor - Xerox DocuColor 12/DCCS50 Service Manual

Figure 2 Removing the Duplex Path Sensor
Installation
1. Reinstall the parts in the reverse order of disassembly.
Repairs and Adjustments
REP 2.21.1, REP 2.21.2

REP 2.21.2 Duplex Out Sensor

Parts List on PL 2.21
Removal
Turn power off and disconnect the power plug.
1. Open the Front Door.
2. Remove the Regi. Unit (REP
3. Remove the Duplex Out Sensor with the bracket
1. Disconnect the connector.
2. Remove the screw.
3. Release the clamp and remove the wire.
4. Remove the bracket.
4. Remove the Duplex Out Sensor from the sensor bracket
1. Remove the Duplex Out Sensor.
1/05
4-42
manuals4you.com manuals4you.com
WARNING
2.14.1).
(Figure 1).
Figure 1 Removing the Bracket
(Figure 2).
DocuColor 12/DCCS50
Reissue