Rep 12.7.1 Duplex Sensor - Xerox DocuColor 12/DCCS50 Service Manual

Figure 3 Install the Belt
2. Reinstall the remaining parts in the reverse order of disassembly.
Repairs and Adjustments
REP 12.6.1, REP 12.7.1

REP 12.7.1 Duplex Sensor

Parts List on PL 12.7
Removal
Turn power off and disconnect the power plug.
1. Remove the following parts:
a. Front Cover (PL 12.1)
b. Rear Cover (PL 12.1)
c. Top Cover (PL 12.2)
2. Slide the Feed Motor (REP
3. Incline the Invert Chute (Figure
1. Remove the screws (2).
2. Incline the Invert Chute.
4. Remove the Invert Chute
1. Disconnect the connector.
2. Remove the Invert Chute.
1/05
4-168
manuals4you.com manuals4you.com
WARNING
12.4.1).
1).
Figure 1 Incline the Invert Chute
(Figure 2).
Reissue
DocuColor 12/DCCS50