Rep 2.15.3 Regi. Motor - Xerox DocuColor 12/DCCS50 Service Manual

REP 2.15.3 Regi. Motor

Parts List on PL 2.15
Removal
Turn power off and disconnect the power plug.
1. Open the Front Door.
2. Remove the Regi. Unit (REP 2.14.1).
3. Remove the Regi. Motor (Figure 1).
1. Disconnect the connector.
2. Release the clamps (2) and remove the wire.
3. Remove the wire from the edge saddle.
4. Remove the screws (2).
5. Remove the Regi. Motor.
Reissue
DocuColor 12/DCCS50
WARNING
Figure 1 Removing the Regi. Motor
Installation
1. Reinstall the parts in the reverse order of disassembly.
1/05
4-37
Repairs and Adjustments
REP 2.15.3