Xerox DocuColor 12/DCCS50 Service Manual page 422

NOTE: Place a sheet of paper on the floor when the Trickle Auger is pulled out to protect
the floor from any spilled Developer.
Figure 5 Remove the Trickle Auger
Repairs and Adjustments
REP 6.7.2
Installation
NOTE: When installing the Development/BP0 Drive and IBT Cleaner Retract, make sure the
couplings are properly meshed. Push the Development Clutch in after temporarily locking the
Development BP0 Drive and the IBT Cleaner Retract
1/05
4-98
manuals4you.com manuals4you.com
(Figure 6).
Figure 6 Install the drives
DocuColor 12/DCCS50
Reissue