Cover; Rep 11.1.1 Platen Cushion - Xerox DocuColor 12/DCCS50 Service Manual

REP 11.1.1 Platen Cushion

Parts List on PL 11.1
Removal
Turn power off and disconnect the power plug.
NOTE: The Platen Cushion is fixed in place by double-sided tape.
1. Peel off the Platen Cushion (Figure
1. Open the Platen Cover.
2. Peel off the Platen Cushion.
Figure 1 Remove the Platen Cushion
Installation
NOTE: After peeling off the Platen Cushion, completely remove the tape from the Platen

Cover.

1. Install the Platen Cushion (Figure 2).
1. Remove the seal.
2. Push the Platen Cushion in the direction of the arrow.
3. Slowly lower the Platen Cover and push it onto the Platen Cushion.
Reissue
DocuColor 12/DCCS50
WARNING
1).
Figure 2 Install the Platen Cushion
1/05
4-153
Repairs and Adjustments
REP 11.1.1