Rep 5.5.2 Auger Belt - Xerox DocuColor 12/DCCS50 Service Manual

REP 5.5.2 Auger Belt

Parts List on PL 5.5
Removal
Turn power off and disconnect the power plug.
NOTE: Protect the floor with a sheet of paper where the removed Waste Toner Auger is to be
placed.
1. Remove the Waste Toner Auger (REP
2. Remove the spring (Figure 1).
1. Remove the E-clips (3).
2. Remove the bearings (3).
3. Remove the spring.
4. Loosen the screws (2).
Figure 1 Remove the Spring
3. Remove the Auger Belt (Figure 2).
1. Remove the screws (3).
2. Remove the Auger Assembly.
3. Remove the Auger Belt.
Repairs and Adjustments
REP 5.5.2
WARNING
5.5.1).
1/05
4-74
manuals4you.com manuals4you.com
Figure 2 Remove the Auger Belt
Reissue
DocuColor 12/DCCS50