Table of Contents
Advertisement
Table 1 Test Patterns
Pattern
Number
Pattern Name
Description
55
Color patch: 2nd page
The middle color patch for
the Editor Pad is output.
56
Color patch: 3rd page
The bottom color patch for
the Editor Pad is output.
82
Grid (Measurement) - 600 20mm pitch/2dotline grid
Paper size: A3 or 17
84
Grid (Registration) - 600
Scale/2dotline grid
Paper size: A3A4L/A4S/
B4S/B5L/B5S/LetterL/Let-
terS
85
Grid (45 degree) - 600
45 degree grid/2dotline
Paper size: A3 or 17
88
Color registration (Mea-
Cross mark/4dotline
surement) - 600
Paper size: A3 or 17
89
Color registration (Visual
Color registration visual
observation) - 600
check pattern
Paper size: 17 or A3
97
Half tone - 4C
Any density pattern (Vari-
able Cin% can be set).
Paper size: A3 or 17
98
Halftone - 3C
Any density pattern (Vari-
able Cin% can be set).
Paper size: A3 or 17
99
Other Halftones
Any density pattern (Vari-
able Cin% can be set).
Paper size: A3 or 17
100
16 grasslike SS
SS direction: 16 gray-
scale
Paper size: A3 or 17
101
ProCon
ProCon patch pattern/
16.3x19.3 mm patch
Paper size: A3 or 17
102
TED/STV - 600
TED/STV
Paper size: A4L
103
Wedge SS - 600
SS direction pattern/1
gray-scale
Paper size: A3 or 17
General Procedures
dC612 Color Test Pattern Print, dC701 Fuser Nip Mea-
dC701 Fuser Nip Measurement
Purpose
Remarks
Makes a copy for the Contact Arc Adjustment and measures the Fuser Nip Width with a simple
PostIPS (Image Process-
operation.
ing)
PostIPS (Image Process-
NOTE: For details, see Adjustments Section
ing)
Procedure
IOT (Image output)
1.
Enter the Service Diagnostics Mode. Refer to
using the
IOT (Image Processing)
2.
Select Adjustments on the Service Entry Screen.
3.
Select Other Adjustments on the Adjustments Screen. Other Adjustments Screen is dis-
played.
IOT (Image Processing)
4.
Select Fuser Nip Adjustments (dC701). Fuser Nip Adjustment Screen is displayed.
5.
Check that A4 LEF or Letter LEF paper has been loaded into Tray 5.
IOT (Image Processing)
6.
Select Nip Adjustment Black Copy and press Start.
7.
The message execute is displayed.
IOT (Image Processing)
a.
b.
IOT (Image Processing)
8.
The message "Completed" is displayed when the "Nip Adjustment Black Copy" is com-
pleted successfully.
a.
IOT (Image Processing)
9.
Select Nip Adjustment Sequence.
10. The message "Executing in Progress" is displayed at the same time the Nip Width Mea-
IOT (Image Processing)
surement begins.
11. The message "Completed" is displayed when the "Nip Adjustment Sequence" is com-
pleted successfully. The message "Not completed successfully" will be displayed when
IOT (Image Processing)
the "Nip Adjustment Sequence" is not completed successfully.
12. Measure the nip width of the output paper for "Nip Adjustment Sequence".
IOT (Image Processing)
IOT (Image Processing)
IOT (Image Processing)
1/05
6-122
manuals4you.com
manuals4you.com
4:ADJ 8.1.1
PWS.
Make a copy for measuring the nip width by using A4 LEF or Letter LEF.
A error message screen will be displayed if there is no paper tray loaded with A4
LEF or Letter LEF.
When the "Nip Adjustment Black Copy" is not completed successfully, the message
"Not completed successfully" will be displayed.
Fuser Nip Adjustment (dC701).
Entering the Service Diagnostic Mode
Reissue
DocuColor 12/DCCS50
Advertisement
Table of Contents
Troubleshooting
