Dc918 Iot Highlight Setup - Xerox DocuColor 12/DCCS50 Service Manual

Table 1 Xero-related NVM
ID (dec) NVM Number Item
98 775-785 TC SET - M
99 775-786 TC SET - C
Reissue
DocuColor 12/DCCS50

dC918 IOT Highlight Setup

Max. (dec)
Purpose
65535
• Sets the same Hi-Light density reproduction start points (for K, Y, M and C) and sets the
65535 same Hi-Light densities for In-Board and Out-Board.
• Sets the ESV/ADC control target values.
NOTE: For details on dC918 IOT Highlight Setup, see Adjustments Section 4:
Highlight Setup (dC918).
1/05
dC915 Machine Output , dC918 IOT Highlight Setup
6-125
ADJ 9.1.5 IOT
General Procedures