Rep 2.8.2 Tray 2/3/4 Feed-Out Sensor; Removing The Baffle; Removing The Bracket - Xerox DocuColor 12/DCCS50 Service Manual

REP 2.8.2 Tray 2/3/4 Feed-out Sensor

Parts List on PL 2.8
Removal
NOTE: This page describes how to remove the Tray 2 Feed-out Sensor.
Turn power off and disconnect the power plug.
1. Open the Left Lower Cover.
2. Move the baffle in the direction shown and remove it
1. Remove the baffle.
2. Remove the springs (2).
Figure 1 Removing the Baffle
3. Remove the sensor (the whole bracket)
1. Remove the screw.
2. Disconnect the connector.
3. Remove the bracket.
Repairs and Adjustments
REP 2.8.2
WARNING
(Figure 1).
(Figure 2).
4. Remove the Tray 2 Feed-out Sensor
1. Remove the Tray 2 Feed-out Sensor.
1/05
4-26
manuals4you.com manuals4you.com
Figure 2 Removing the Bracket
(Figure 3).
DocuColor 12/DCCS50
Reissue