Xerox DocuColor 12/DCCS50 Service Manual page 450

5. Disconnect the connector (Figure 2).
1. Disconnect the connector.
2. Release the clamps (2) and remove the wire.
Figure 2 Disconnect the Connector (Rear of Fuser)
6. Remove the Pressure Roll Heater Rod
1. Remove the Pressure Roll Heater Rod.
Repairs and Adjustments
REP 8.3.4
(Figure 3).
Figure 3 Remove the Pressure Roll Heater Rod
Installation
1. Reinstall the parts in the reverse order of disassembly.
1/05
4-126
manuals4you.com manuals4you.com
Reissue
DocuColor 12/DCCS50