Rep 6.1.1 Rotary Pwb - Xerox DocuColor 12/DCCS50 Service Manual

REP 6.1.1 Rotary PWB

Parts List on PL 6.1
Removal
Turn power off and disconnect the power plug.
1. Open/close the IOT Control PWB chassis
2. Remove the bracket (Figure 1).
1. Remove the screws (5).
2. Remove the bracket.
Figure 1 Remove the Bracket
3. Remove the Rotary PWB with the plate
1. Disconnect the connectors (3).
2. Release the clamp and remove the wire.
3. Remove the screws (2).
4. Remove the plate.
Reissue
DocuColor 12/DCCS50
WARNING
(REP 9.2.1).
(Figure 2).
Figure 2 Remove the Rotary PWB and Plate
4. Remove the Rotary PWB (Figure
1. Remove the screws (4).
2. Remove the Rotary PWB.
1/05
4-77
3).
Repairs and Adjustments
REP 6.1.1