Xerox DocuColor 12/DCCS50 Service Manual page 543

Figure 1 Checking the Gap
Adjustment
NOTE: The steps are the same for the left and right sides.
1. Open the DADF and loosen the screws
1. Loosen the screws (2).
Reissue
DocuColor 12/DCCS50
(Figure 2).
Figure 2 Preparing to Adjust
2. Close the DADF and, by turning the Adjusting Screw, adjust the gap between the Platen
Glass Side Guide and the Transport Assembly Frame
1/05
4-219
(Figure 3).
Repairs and Adjustments
ADJ 12.3.3