Rep 2.15.1 Regi. Sensor - Xerox DocuColor 12/DCCS50 Service Manual

REP 2.15.1 Regi. Sensor

Parts List on PL 2.15
Removal
Turn power off and disconnect the power plug.
1. Open the Front Door.
2. Push the lever down and pull out the drawer assembly.
3. Pull the drawer assembly out to a maintenance position
1. Push the stoppers on both sides.
2. Pull out the drawer assembly.
Figure 1 Opening the Drawer
4. Remove the Regi. Cover (Figure 2).
1. Remove the screws (3).
2. Remove the Regi. Cover.
Reissue
DocuColor 12/DCCS50
WARNING
(Figure 1).
Figure 2 Removing the Regi. Cover
5. Remove the Regi. Sensor (Figure
1. Remove the screw.
2. Disconnect the connector.
3. Remove the Regi.Sensor.
1/05
4-35
3).
Repairs and Adjustments
REP 2.15.1